Heating oil EL
DIN 51603-1

Test parameter | Method |
---|---|
Density (15 °C) | DIN EN ISO 12185 |
Calorific value, H0 | DIN 51900-1/-2 |
Flash point P.M. | DIN EN ISO 2719 |
Kinematic viscosity (20 °C) | DIN 51562-1 |
Distillation process | DIN EN ISO 3405 |
Cloudpoint | DIN EN 23015 |
CFPP | DIN EN 116 |
Coke residue | DIN EN ISO 10370 |
Sulfur content | DIN EN ISO 20844 |
Water content | DIN EN ISO 12937 |
Total pollution | DIN EN 12662 |
Ash content | DIN EN ISO 6245 |
Thermal stability (sediment) | DIN 51371 |
Further possible test parameters:
Additional parameter | Method |
---|---|
Red dye content | DIN 51430 |
Solvent Yellow 124 content | DIN 51430 |
Nitrogen content | DIN 51444 |
Refractive index | DIN 51423-2 |
C/H - ratio | ASTM D 5291 |
Electrical conductivity | DIN 51412-1 |
Element screening | ASG 1912 |
GCxGC-TOF MS analytics | ASG 2253 |
Peroxide number | ASTM D 3703 |
Pourpoint | DIN ISO 3016 |
Oxygen content | DIN 51732 mod. |
Heat capacity | ASG 2023 |
Thermal conductivity | ASTM D 2717 |
Ignition temperature | DIN 51794 |
Analysis using GCxGC
With the analysis by GCxGC (ASG 2253 or ASG 2502) further methods are available. Additional information can be found in the section "Special analytics" or on request.
Contact

Dr. Karolina Kazmierczak
Laboratory Manager
Analysis order
Download your analysis order for heating oil EL DIN 51603-1

We have been accredited for the analysis of fuels since 1998.
Download of accreditation certificate 2023